MACH3 USB CNC Interface Board BLUsbMachV20 MACH3 CNC Board

Sepcifications

Part Number: BL-USBMach V2.0

No of Axis: 5  (you can connect 5 stepper motor drives or servo drives)

Maximum step-pulse frequency: 100KHz  (suitable for smooth servo or stepper motion)

Automatic probe tool Support: Yes

Emergency input: Yes

Limit switches: Yes (5 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device)

Electronic handwheel Support: Yes

Optical Isolation between USB Side Control and External inputs: Yes

External Voltage: 12V/24V

Spindle Control Output: Yes (0-10V output port) with Spindle Direction (FWD) output

Isolated Outputs: 4 general-purpose isolated relay drive output interface (can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device)

Power Status LED: 1 Status LED (indicate Power status of the controller board)

Size: 9x6cm / 3.54×2.36in

Tested with following Operating Systems:Windows XP (direct)

Windows 7 64bit /32Bit (direct)

Windows 10 (Indirect using Windows XP on VmWare)